USING BENTONITE AS A WINE CLARIFIER

- What is Bentonite?

Bentonite is a gray, clay granule that is used in wines as a clarifier. It is

unique in that it possess a negative electrostatic charge. (Just a fancy

word for static electricity) This attracting charge along with hydrogen

bonding, causes suspended particles in the wine to cling to it as it settles

to the bottom of the container.


- What Are The Advantages Of Using Bentonite?

There are several advantages to using Bentonite. It is very effective in

dragging out yeast, tannins and other stubborn protein-based particles

that may want to linger after fermentation. The result is a wine with a

glassy clear appearance and a color that is radiant. It also helps to

reduce the occurrence of certain off-flavors, as well as reduce the

wine's ability to oxidize.


- Are All Bentonites The Same?

Not at all. The particular type of Bentonite we offer comes from a specific

mine in Wyoming that is known for providing Bentonite with an unusually

high electrostatic charge. That is why we call ours Speedy Bentonite. There

are other major source of Bentonite, but they are primarily intend to be

used as a bedding sealant for watering ponds.


- How Is Bentonite Used?

Bentonite is relatively easy to use. You start out by mixing it with water

into a slurry. The slurry will have the consistency of a thin, watery cement

mix. A dose of the slurry mix is then stirred into the wine. It should also be

noted here that the Bentonite should not be added to the wine until the

fermentation is complete.

The method we recommended for making the slurry is to use boiling water

and to mix it in a blender. Blend it for 1 to 2 minutes until a creamy head

is formed. The slurry then needs to set for about an hour so as to allow

the Bentonite granules to swell and become saturated. The recommended

mix is 3 tablespoons of Bentonite to 1 pint of boiling water. It is then

recommended that you add 1 to 2 tablespoons of the slurry mix to each

gallon of wine that is to be treated.


- Are There Any Tips For Using Bentonite?

There are a couple of thing you can do to make your Bentonite treatment

more effective:

First of all, the colder the wine is the stronger the Bentonite's static

charge. At room temperature Bentonite is usually adequately effective,

but by chilling the wine down to around 45 degrees the Bentonite's

strength is enhanced considerably.

Secondly, when adding the Bentonite to the wine, it is best to stir it in

thoroughly. Don't agitate the wine, but smoothly blend it in to where you

know, without question, that it is evenly dispersed throughout the wine.

Also, stirring the wine several times after the Bentonite has been add,

will give the Bentonite more time to attract particles before settling. For

example, stir it once every hour or so throughout an evening.
 

To receive our free winemaking newsletter! Click Here

E. C. Kraus

Home Wine & Beer Making Supplies

Address: 733 S. Northern Blvd. - P. O. Box 7850 - Independence, MO  64053

Phone:(816) 254-7448  Fax:(816) 254-7051  Toll Free: (800) 353-1906

Email: customerservice@eckraus.com

Copyright (c) 2003, Kraus Sales, L. L. C. All rights reserved. This article may be passed

along to friends and others, as long as it is used in its entirety. Distribution or publishing of

this article in partial or edited form is prohibited.